The MB ABS Analog-CANBus Converter is a small electronic device used to read the analog signal obtained from a VR-type ABS speed sensor and convert it into a CANBus signal compatible with the speed signal output by the original Mercedes ABS/ESP module. Based on the reading from a single sensor, the device simulates the operation of all four wheels of the car.
This unit give posibility to run the original 5g-tronic [722.6] transmission controller, because besides the CANBus data from the engine, the EGS51/52/53 transmission controller also requires data from the ABS/ESP module.
Manual English --> CLICK
Instrukcja Polski --> CLICK
Additionally, I designed a set consisting of an ABS ring mounted on a bracket and a VR sensor. The entire assembly, mounted at the transmission output, allows for the correct reading of the vehicle's speed.
This unit give posibility to run the original 5g-tronic [722.6] transmission controller, because besides the CANBus data from the engine, the EGS51/52/53 transmission controller also requires data from the ABS/ESP module.
Manual English --> CLICK
Instrukcja Polski --> CLICK
